Glass Backsplash Installion

Here is some basic instructions when installing glass tile.First make sure the area is clean and ready to be tiled wether your backer board is cement or a wet area sheet rock make sure there is no gaps or rough spots.A thin, thin-set, usually white and drying clear, is needed to set the tiles. Make sure you smooth the thin-set to make it as invisible as possible. The grout you use should be an epoxy grout which is not porous and will not absorb moisture. Tints and colors can be added to the epoxy as well as a glitter for special effects. If you choose a cement grout it will need to be sealed every two years. When you are ready to install your backsplash you are going to have to remove the existing backsplash. One way is to use a small sledge hammer to break the tiles into smaller pieces. Be sure you use eye protection as the tile can shatter. Use a 5-in-1 tool, small 'pry bar' or flat blade screwdriver to remove small pieces of tile. I would not suggest a steel putty knife as the blade may become bent. You will probably have some sort of wall damage as the adhesive used for the tiles was not made to be removed. The best way to fix the wall is to simply replace the damaged wall with new drywall. If there is not extensive damage to the existing wall you can repair it though large areas of damage will need replacing. Once you have installed your new backsplash and laid the grout, use a mixture of vinegar and water and several rags to remove any grout residue from the tiles

Was the Article Useful?

I hope you enjoyed the article! Please rate it at the following link, your feedback is highly appreciated:

Glass Backsplash Installion



About the Author
People use MiNeeds.com to get competitive bids from local professionals, such as: photographers, lawyers, home contractors, wedding services, accountants, web designers, movers, etc. For more details, please visit: Roanoke Home Repair & Lawn Services - Get Bids & Save | MiNeeds

Remodeling Your Bathroom by Chris Drake

When you start to think about all of the bathroom remodeling ideas that you might have thought of over the years, at some point you may question if you should do it all yourself or get some skilled assistance.

Making an informed choice is critical. Let us shed some light on this question. When it comes to bathroom renovation, you'll have lots of choices to make. The first step in your remodel is the setting up stage.

Are you very handy when it comes to renovation or a little handy? This article covers all skill levels. Whether you are a beginner or a specialist.

If you do feel more than contented with projects around the house then you'll most likely have no troubles with these bathroom remodeling ideas. You may have the skills to tackle some of the more difficult projects like completing remodeling or rearranging the floor plan. Have you ever considered an open shower? They do not have doors at all.

If your ability level is intermediate, you should be able to do nearly all of these ideas with few problems. One of the easiest tasks is to replace the fixtures on the sink. Installing a new mirror is another easy project. If you decide to change the floor you'll need assistance.

Removing old flooring can be harder than putting down the new flooring. Linoleum which comes in a roll is a little more difficult to do simply because of the measuring and cutting and little room for error. If you are looking for a straightforward type of flooring, try self stick tiles. Correcting mistakes is simple.

If you only have a basic skill level, you'll have to hire a expert. There are a lot of people out there who can do the work but picking the right people is the most important of all. Make sure to ask friends first if they have had work done and are happy with the results.



About the Author
Click here for bathroom tile design ideas and bathroom wall tiles.